Electric Scraper Winch Mine Horizontal Slope Handling Explosion-Proof Scraper Winch

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: 2JPB-30
• Tonnage: 1T
• Reel Number: 2
• Running Mode: Moving
• Feature: Antiseptic, Insulating, Explosion-Proof
• Certification: CE
• Standard: National Standards
• Main Wire Rope Min. Tension: 275000 N
• Wire Rope Diameter Main Wire Rope: 15.5 mm
• Wire Rope Diameter Secondary Wire Rope: 14.0 mm
• Drum Dia.: 280 mm
• Drum Rim Diameter: 510 mm
• Drum Width: 160 mm
• Wire Rope Sizetmain Drum: 80 M
• Wire Rope Size Secondary Drum: 110 M
• Electric Motor Power: 30 Kw
• Electric Motor Rotating Speed: 1470 R/Min
• Dimensions Length: 1650 mm
• Dimensions Width: 820 mm
• Dimensions Height: 700 mm
• Total Weight (Excluding Skips and Pulle: 1155 Kg
• Transport Package: Wooden
• Specification: 1650*820*700mm
• Trademark: ZHONGMEI
• Origin: Shandong China
• Package Size: 165.00cm * 82.00cm * 70.00cm
• Package Gross Weight: 1155.000kg
• Lead Time: 5 days (1 - 1 Pieces) ; 12 days (2 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Product Description

Introduction of Mining Scraper Winch

Operation of 2JPB-30KW Scraper Winch
1. After the empty car is running normally, slowly start the winch. Lift the two brake levers with both hands and send them to the air. After the signal is sent, no one can open the traffic without any debris. It is strictly forbidden to break into large blocks, irons and explosives.
2. Before pulling the bucket, the brake should be released away from the side of the motor, and the brake lever on the side close to the motor should be pressed. The operation of the bucket when the bucket is retracted is opposite to that of the front pull. Whether it is front pull or back, it is strictly forbidden to press the two brake levers at the same time, otherwise the pulley stays, pulleys and steel ropes will be damaged.
3. When the emule is running, it is strictly forbidden for personnel to enter the winch to work in the hoe. If the emergency brake signal is heard or seen during the operation of the winch, it should be immediately released.
4. The ore block size should not exceed 300 mm. If the block exceeds 300 mm, it should be treated and then transported. If the resistance is high, the bucket can be retracted 1-2 meters, then smashed, and must not be deadlifted. . If the rock is too large or the road is not flat, the block should be broken or trimmed. It is strictly forbidden to hit a large piece of meteorite with a bucket.
5. When operating, press the handbrake to tighten the rope. Do not tighten the two handbrakes at the same time to prevent accidents.
6. When placing the wire rope, the wire rope on the reel should be kept at least three times. It is strictly forbidden to finish all.
7. During operation, it should be noted that the winch sound is abnormal and overload operation is prohibited.
8. In the course of operation, if there is a phenomenon such as wire rope breakage, pulley crushing, etc., when replacing the wire rope or pulley, first cut off the power lock switch and hang the warning sign that "someone works. No power is allowed".zmwm21

Product Parameters

Parameter of Mining Scraper Winch

Item		unit	Model
			2JPB-7.5	2JPB-15	2JPB-22	2JPB-30	2JPB-55
			2JP-7.5	2JP-15	2JP-22	2JP-30	2JP-55
Main wire rope Min. tension		N	8000	14000	20000	275000	44000
Average speed	Main wire rope	±5%m/s	1.00	1.10	1.20	1.20	1.20
	Secondary wire rope		1.00	1.50	1.50	1.60	1.80
Wire rope diameter	Main wire rope	mm	9.3	12.5	14.0	15.5	18.5
	Secondary wire rope		9.3	11.0	11.0	14.0	16.0
Drum	Dia.	mm	205	225	280	280	350
	Rim diameter	mm	350	435	510	510	625
	Width	mm	80	125	160	160	180
Wire rope size	Main drum	m	45	80	80	80	100
	Secondary drum	m	45	100	100	110	130
Electric motor	Model	/	YBK2-132M-4	YBK2-160L-4	YBK2-180L-4	YBK2-200L-4	YBK2-250M-4
		/	Y2-132M-4	Y2-160L-4	Y2-180L-4	Y2-200L-4	Y2-250M-4
	Power	KW	7.5	15	22	30	55
	Rotating speed	r/min	1440	1460	1470	1470	1470
Dimensions	Length	mm	1210	1525	1600	1650	2070
	Width	mm	565	660	730	820	1010
	Height	mm	490	620	640	700	890
Total weight (excluding skips and pulleys)		kg	390	660	980	1155	2125

Detailed Photos

Company Profile